{"product_id":"tile-hole-locator","title":"🔧 Adjustable Tile Hole Locator 🛒","description":"\u003cp\u003e📐 One Wrong Hole Can Ruin the Whole Tile.\u003c\/p\u003e\u003cp\u003eYou measure.\u003c\/p\u003e\u003cp\u003eYou mark.\u003c\/p\u003e\u003cp\u003eYou check again.\u003c\/p\u003e\u003cp\u003eThen you drill…\u003c\/p\u003e\u003cp\u003eAnd realize the hole is a little too far left. 😩\u003c\/p\u003e\u003cp\u003eNow the pipe doesn’t line up.\u003c\/p\u003e\u003cp\u003eThe outlet won’t fit.\u003c\/p\u003e\u003cp\u003eAnd that expensive tile may be headed straight for the trash.\u003c\/p\u003e\u003cp\u003eThe Adjustable Stainless Steel Tile Hole Locator helps you copy the position of existing pipes, sockets and openings before transferring those measurements directly onto the tile.\u003c\/p\u003e\u003cp\u003eMeasure once.\u003c\/p\u003e\u003cp\u003eLock the position.\u003c\/p\u003e\u003cp\u003eTransfer the layout.\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"https:\/\/storage2.tianyierp.com\/public\/product-management\/2026-11-06\/97724734321459201.png\" alt=\"image.png\"\u003e\u003c\/p\u003e\u003cp\u003eThen drill with confidence.\u003c\/p\u003e\u003ch2\u003e🔧 Stop Guessing Where the Hole Should Go\u003c\/h2\u003e\u003cp\u003eTile installation becomes much harder when several openings need to line up perfectly.\u003c\/p\u003e\u003cp\u003eWater pipes.\u003c\/p\u003e\u003cp\u003eElectrical outlets.\u003c\/p\u003e\u003cp\u003eWall boxes.\u003c\/p\u003e\u003cp\u003eMultiple fixtures.\u003c\/p\u003e\u003cp\u003eA ruler can tell you the distance.\u003c\/p\u003e\u003cp\u003eBut this locator helps you physically copy the layout.\u003c\/p\u003e\u003cp\u003eThat means less:\u003c\/p\u003e\u003cp\u003e❌ Re-measuring\u003cbr\u003e❌ Guessing\u003cbr\u003e❌ Drawing multiple reference lines\u003cbr\u003e❌ Misaligned holes\u003cbr\u003e❌ Wasted tile\u003c\/p\u003e\u003cp\u003eAnd more confidence before you make the first cut.\u003c\/p\u003e\u003ch2\u003e📏 Measure. Lock. Transfer.\u003c\/h2\u003e\u003cp\u003eThe process is simple:\u003c\/p\u003e\u003cp\u003e1️⃣ Position the tool\u003c\/p\u003e\u003cp\u003eAlign the ruler with the wall, pipe, socket or other fixed reference point.\u003c\/p\u003e\u003cp\u003e2️⃣ Adjust the arms\u003c\/p\u003e\u003cp\u003eSlide and rotate the locator until the built-in hole templates match the positions you need.\u003c\/p\u003e\u003cp\u003e3️⃣ Lock the layout\u003c\/p\u003e\u003cp\u003eTighten the adjustment knob so the measurements stay in place.\u003c\/p\u003e\u003cp\u003e4️⃣ Move it to the tile\u003c\/p\u003e\u003cp\u003eTransfer the exact positioning onto your tile or panel.\u003c\/p\u003e\u003cp\u003e5️⃣ Mark the opening\u003c\/p\u003e\u003cp\u003eTrace the correct hole template.\u003c\/p\u003e\u003cp\u003eThen use your appropriate drill, hole saw or cutting tool separately.\u003c\/p\u003e\u003ch2\u003e🎯 Copy the Layout Instead of Rebuilding It With Measurements\u003c\/h2\u003e\u003cp\u003eThis is where the tool saves time.\u003c\/p\u003e\u003cp\u003eInstead of writing down:\u003c\/p\u003e\u003cp\u003e“127mm from the left…”\u003c\/p\u003e\u003cp\u003e“92mm from the bottom…”\u003c\/p\u003e\u003cp\u003e“Another pipe 68mm over…”\u003c\/p\u003e\u003cp\u003eYou can physically lock the relative positions into the tool.\u003c\/p\u003e\u003cp\u003eMove the whole setup to the tile.\u003c\/p\u003e\u003cp\u003eMark.\u003c\/p\u003e\u003cp\u003eDone.\u003c\/p\u003e\u003cp\u003eEspecially useful when you’re working around multiple plumbing points or wall openings.\u003c\/p\u003e\u003ch2\u003e🔘 Built-In Hole Templates\u003c\/h2\u003e\u003cp\u003eThe locator includes several common circular opening sizes built directly into the stainless-steel ruler.\u003c\/p\u003e\u003cp\u003eCommon versions include:\u003c\/p\u003e\u003cp\u003e⭕ 25mm\u003cbr\u003e⭕ 40mm\u003cbr\u003e⭕ 45mm\u003cbr\u003e⭕ 55mm semicircle\u003c\/p\u003e\u003cp\u003eThat makes it easier to mark common pipe and fixture openings without finding a separate template every time.\u003c\/p\u003e\u003ch2\u003e↔️ Multi-Directional Adjustment\u003c\/h2\u003e\u003cp\u003eReal walls aren’t always convenient.\u003c\/p\u003e\u003cp\u003eSometimes the opening is above.\u003c\/p\u003e\u003cp\u003eSometimes it’s beside the tile edge.\u003c\/p\u003e\u003cp\u003eSometimes multiple pipes sit at different heights.\u003c\/p\u003e\u003cp\u003eThe adjustable ruler can slide and rotate to match different layouts before you lock everything into position.\u003c\/p\u003e\u003cp\u003eThat flexibility is what makes it more useful than a standard fixed ruler.\u003c\/p\u003e\u003ch2\u003e🧱 Made for Tile Work — Useful Beyond Tile\u003c\/h2\u003e\u003cp\u003eUse it for layout and hole positioning on compatible materials such as:\u003c\/p\u003e\u003cp\u003e🧱 Ceramic tile\u003cbr\u003e🪨 Marble\u003cbr\u003e🪵 Wood panels\u003cbr\u003e🚿 Plumbing installations\u003cbr\u003e🔌 Electrical outlet positioning\u003cbr\u003e💡 Wall fixtures\u003cbr\u003e🏠 Renovation projects\u003c\/p\u003e\u003cp\u003eIt’s especially useful anywhere the new surface needs to match an opening that already exists behind or beside it.\u003c\/p\u003e\u003ch2\u003e🔩 Stainless Steel Construction\u003c\/h2\u003e\u003cp\u003eA positioning tool needs to stay straight.\u003c\/p\u003e\u003cp\u003eIf the ruler bends or flexes, your measurements become useless.\u003c\/p\u003e\u003cp\u003eThe stainless-steel construction is designed to provide:\u003c\/p\u003e\u003cp\u003e✅ Better rigidity\u003cbr\u003e✅ Repeatable positioning\u003cbr\u003e✅ Resistance to everyday jobsite wear\u003cbr\u003e✅ Clear measurement references\u003cbr\u003e✅ Long-term reusable use\u003c\/p\u003e\u003cp\u003eSome current versions use approximately 2.0mm-thick stainless steel for extra rigidity.\u003c\/p\u003e\u003ch2\u003e📏 Choose the Reach You Need\u003c\/h2\u003e\u003cp\u003eDepending on the version, the tool is commonly available in:\u003c\/p\u003e\u003cp\u003e40cm — Standard Reach\u003c\/p\u003e\u003cp\u003eGood for many everyday tile, pipe and outlet positioning tasks.\u003c\/p\u003e\u003cp\u003e60cm — Extended Reach\u003c\/p\u003e\u003cp\u003eBetter when the reference point or multiple openings are farther apart.\u003c\/p\u003e\u003cp\u003eChoose based on the size of tile and the distance between the openings you normally work with.\u003c\/p\u003e\u003ch2\u003e🛠️ Especially Useful Around Plumbing\u003c\/h2\u003e\u003cp\u003eOne of the most frustrating tile jobs?\u003c\/p\u003e\u003cp\u003eSeveral water pipes sticking out of the wall.\u003c\/p\u003e\u003cp\u003eYou need every opening to line up.\u003c\/p\u003e\u003cp\u003eIf one is wrong, the tile may not sit flat.\u003c\/p\u003e\u003cp\u003eUse the locator to capture the pipe positions first, then transfer them onto the tile before drilling.\u003c\/p\u003e\u003cp\u003eMuch easier than trying to reconstruct the entire layout using only a tape measure.\u003c\/p\u003e\u003ch2\u003e🔌 Great for Outlets \u0026amp; Wall Boxes Too\u003c\/h2\u003e\u003cp\u003eNot every opening is a pipe.\u003c\/p\u003e\u003cp\u003eThe adjustable layout also helps when positioning around:\u003c\/p\u003e\u003cp\u003eElectrical boxes\u003cbr\u003eSockets\u003cbr\u003eSwitch openings\u003cbr\u003eWall-mounted fixtures\u003cbr\u003eSpotlight positions\u003c\/p\u003e\u003cp\u003eUse a reliable reference edge, lock your measurements, transfer the position and verify before cutting.\u003c\/p\u003e\u003ch2\u003e💸 One Accurate Measurement Can Save an Expensive Tile\u003c\/h2\u003e\u003cp\u003eTiles aren’t free.\u003c\/p\u003e\u003cp\u003eAnd once the hole is drilled in the wrong place, there isn’t much room for correction.\u003c\/p\u003e\u003cp\u003eA simple positioning tool can help reduce the chance of wasting:\u003c\/p\u003e\u003cp\u003eExpensive porcelain tile\u003cbr\u003eMarble\u003cbr\u003eDecorative wall panels\u003cbr\u003eTime\u003cbr\u003eAdhesive\u003cbr\u003eLabor\u003c\/p\u003e\u003cp\u003eThe tool doesn’t make the hole for you.\u003c\/p\u003e\u003cp\u003eIt helps make sure you’re putting the hole in the right place first.\u003c\/p\u003e\u003ch2\u003e🙌 Useful for Pros — Simple Enough for DIY\u003c\/h2\u003e\u003cp\u003eProfessional tilers may use it to speed up repetitive layout work.\u003c\/p\u003e\u003cp\u003eDIY renovators can use it to reduce the number of measurements they have to manage at once.\u003c\/p\u003e\u003cp\u003eIf you can:\u003c\/p\u003e\u003cp\u003eAlign a ruler\u003cbr\u003eSlide the locator\u003cbr\u003eTighten a knob\u003cbr\u003eTrace a hole\u003c\/p\u003e\u003cp\u003eYou can understand the basic workflow.\u003c\/p\u003e\u003ch2\u003e⚠️ Measure Twice. Verify Once More. Then Drill.\u003c\/h2\u003e\u003cp\u003eThis is a positioning and marking tool.\u003c\/p\u003e\u003cp\u003eIt does not drill or cut the tile.\u003c\/p\u003e\u003cp\u003eBefore drilling:\u003c\/p\u003e\u003cp\u003e✅ Confirm the locator is aligned to the same reference edge used during measurement\u003cbr\u003e✅ Tighten all adjustment knobs securely\u003cbr\u003e✅ Re-check the transferred position\u003cbr\u003e✅ Confirm the hole diameter\u003cbr\u003e✅ Use the correct drill or cutting tool for your material\u003c\/p\u003e\u003cp\u003eA 30-second check is much cheaper than replacing another tile.\u003c\/p\u003e\u003ch2\u003e❓ Frequently Asked Questions\u003c\/h2\u003e\u003cp\u003eWhat does this tool actually do?\u003c\/p\u003e\u003cp\u003eIt copies and transfers the position of pipes, sockets and other openings so you can mark their location on tile or another compatible surface.\u003c\/p\u003e\u003cp\u003eDoes it drill the hole?\u003c\/p\u003e\u003cp\u003eNo.\u003c\/p\u003e\u003cp\u003eIt measures, positions and marks. You still need a suitable drill, hole saw or cutting tool.\u003c\/p\u003e\u003cp\u003eWhat materials can it be used with?\u003c\/p\u003e\u003cp\u003eIt is commonly used for ceramic tile, marble, wood panels and other renovation materials where accurate hole positioning is required.\u003c\/p\u003e\u003cp\u003eWhat hole sizes are built in?\u003c\/p\u003e\u003cp\u003eCommon versions include 25mm, 40mm and 45mm circular openings plus a 55mm semicircular template. Check the exact version you order.\u003c\/p\u003e\u003cp\u003eCan it position more than one hole at the same time?\u003c\/p\u003e\u003cp\u003eYes. The adjustable design can help capture and transfer multiple opening positions in one setup.\u003c\/p\u003e\u003cp\u003eWhat sizes are available?\u003c\/p\u003e\u003cp\u003eCommon versions are available in approximately 40cm and 60cm lengths.\u003c\/p\u003e\u003cp\u003eIs it stainless steel?\u003c\/p\u003e\u003cp\u003eYes. Current listings describe the tool as stainless-steel construction.\u003c\/p\u003e\u003cp\u003eCan I rotate the ruler?\u003c\/p\u003e\u003cp\u003eYes. The adjustable layout allows multi-directional positioning and rotation before the locking knob is tightened.\u003c\/p\u003e\u003ch2\u003e📐 Stop Measuring the Same Hole Three Times\u003c\/h2\u003e\u003cp\u003eThe wall already knows where the opening is.\u003c\/p\u003e\u003cp\u003eYour tile just needs to match it.\u003c\/p\u003e\u003cp\u003eCopy the position.\u003c\/p\u003e\u003cp\u003eLock the layout.\u003c\/p\u003e\u003cp\u003eTransfer it directly.\u003c\/p\u003e\u003cp\u003eThen make your cut with more confidence.\u003c\/p\u003e\u003cp\u003e🔧 Adjustable positioning\u003cbr\u003e📏 Built-in measuring scale\u003cbr\u003e⭕ Multiple hole templates\u003cbr\u003e🔩 Stainless-steel construction\u003cbr\u003e🧱 Tile, marble \u0026amp; renovation use\u003cbr\u003e💸 Helps reduce costly positioning mistakes\u003c\/p\u003e\u003cp\u003e👉 Measure. Lock. Transfer. Drill with confidence\u003c\/p\u003e","brand":"fegvc","offers":[{"title":"1 pc","offer_id":50646348988513,"sku":"OCE26110605-40cm","price":39.99,"currency_code":"USD","in_stock":true},{"title":"2 pcs","offer_id":50646349021281,"sku":"OCE26110605-40cm*2","price":64.99,"currency_code":"USD","in_stock":true},{"title":"3 pcs","offer_id":50646349054049,"sku":"OCE26110605-40cm*3","price":83.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0650\/9792\/4705\/files\/97717802361683969.webp?v=1794827402","url":"https:\/\/www.fegvc.com\/products\/tile-hole-locator","provider":"fegvc","version":"1.0","type":"link"}