🔩💪 Metal Repair Epoxy Glue – Fill Cracks & Holes Without Welding🍀
Regular price
$31.99
Regular price
$31.99
Unit price/ per
SAVE
60%
Sold out
Metal repair glue · 100 mL
Fill Small Gaps.
Shape a Better Finish.
A two-part adhesive for compatible, non-structural
repairs. Mix, apply, and allow the repair to cure.
🧩 Gap filling🛠️ Tool-applied repair📦 100 mL option
Watch the original application demo
Spread It.
Smooth It. Let It Cure.
See mixed adhesive being shaped over a small opening.
Application illustration only. The demo does not establish
bond strength, pressure resistance, or service life.
A practical repair-kit addition
Small Defect.
A More Focused Fix.
🧩
Fill Small Defects
Build up suitable surface gaps and irregularities.
🛠️
Apply With Control
Use an applicator to place and shape the mixture.
🎨
Finish After Curing
Sand or coat where the product directions permit.
📦
Compact Format
A 100 mL option for selected repair projects.
Preparation is part of the repair.
Start with a compatible surface, correctly mixed
adhesive, and enough curing time.
Tap a card for the matching guide
Choose Your Material.
Then Choose Your Version.
🔩
For Metal Pipes
Select the metal-pipe version for metals named
on its label. Check the repair's intended
service conditions before use.
🧩
For Plastic Pipes
Select the plastic-pipe version only for plastics
approved in its directions. Different plastics
do not all bond the same way.
These cards explain the options. Select your version
in the product options above; opening a card
does not change your order.
Three steps to a prepared repair
Prep. Mix. Apply.
Read the selected version's directions before starting.
1 · Prepare the surface
Remove loose rust, grease, and debris, then clean
and dry as directed. For an eligible pipe repair,
shut off the supply, drain, and fully depressurize first.
2 · Mix the components
The listing describes a 1:1 A/B mix.
Confirm the ratio and measuring method on your
actual label. Mix thoroughly using a suitable tool,
not bare fingers.
3 · Apply and leave undisturbed
Spread and shape the mixed adhesive with an applicator.
Support the repair where needed and allow full cure
before approved finishing or return to service.
Use with care:
Work with ventilation and avoid skin contact.
Wear the gloves and eye protection specified
on the label or safety data sheet.
Plan the cure, not just the application
A Firm Surface
Is Only the Beginning.
~30 minListed initial set
~24 hrListed full cure
Approximate figures from the listing.
Temperature, mix ratio, thickness, and product version
affect curing. Follow the actual label.
Give the bond time before you finish.
Do not load, machine, or return the item to service
just because the surface feels firm.
Refine the finish after full cure
Shape the Surface.
Complete the Job.
The listing describes sanding, drilling, and painting
after curing. Follow the product directions
for your repair.
🛠️
Refine Carefully
Use suitable tools and protection after full cure.
🎨
Check the Coating
Confirm paint compatibility before finishing.
A cleaner-looking finish starts with a suitable repair.
Material, gap size, preparation, and curing
all affect the result.
Your product at a glance
Know What You Are Ordering.
ProductTwo-part repair adhesive
Selected size100 mL / approximately 3.4 US fl oz
VersionsFor plastic pipes / For metal pipes
Listed mix guide
1:1 A/B; follow the label's ratio and measuring method
Listed cure guideApprox. 30-minute set / 24-hour full cure
Included tools and pack contents follow your selected option.
Workshop equipment and demonstration materials
are not included.
For non-structural repairs only.
Do not use for gas or fuel leaks, drinking-water contact,
pressure vessels, brakes, or other safety-critical repairs.
Keep uncured adhesive away from children and pets.
Before you begin
Good Questions.
Clear Answers.
Which version should I choose?
Match the metal-pipe or plastic-pipe version
to the exact material named on its label.
Neither version is automatically compatible
with every pipe or surface.
Does this replace welding?
It is not a universal welding replacement.
Use only for suitable non-structural repairs,
not to restore the original strength of critical parts.
Can I apply it over an active leak?
Do not work on an operating or pressurized system.
Shut off, drain, and depressurize first.
Have a qualified professional assess pressure-bearing
or essential pipework.
Do I mix equal amounts of A and B?
The listing describes a 1:1 ratio.
Check your label for the exact ratio and whether
to measure by weight or volume.
Do not guess if the directions are unclear.
How long should I let it cure?
The listing gives approximately 30 minutes to set
and 24 hours to fully cure. Conditions and versions
vary; follow your actual label before finishing
or returning an item to service.
Can I sand, drill, or paint it?
Those finishing methods are described in the listing
after full cure. Check the product directions and
use suitable protection for dust, debris, and tools.
What about water, heat, or pressure?
Verified service limits have not been provided here.
Do not assume waterproofing, heat resistance,
or pressure suitability for your project
from promotional images alone.
How much comes with this option?
The current size option is 100 mL,
approximately 3.4 US fl oz.
Check your selected version, quantity,
and included tools before checkout.
Will the repair match the pictures?
The images and animation illustrate use.
Appearance and performance vary with the material,
preparation, mixing, thickness, and curing conditions.
What if I change my mind?
Request a return for any reason within 14 days
of delivery. Contact our team with your order number
for instructions. See the return policy for the
process and applicable return shipping costs.
↩14-Day Returns · For Any Reason
A Little Room to Decide.
Changed your mind? Request your return within
14 days of delivery.