FEGVC Shopping Assurance
PAYMENT
🔌 Metal Wall Plate Spacers 🛒
🔌 Metal Wall Plate Spacers 🛒
BUNDLE & SAVE
Couldn't load pickup availability
🔌 Metal Wall Plate Spacers 🛒
A Firmer Mount.
A Neater Wall Plate.
Help stabilize a compatible loose or recessed outlet mounting with a galvanized metal support spacer—so the device sits more evenly against the finished wall.
Turn Off the Circuit. Verify It Is De-Energized.
Have a qualified electrician assess and install this metal support. Power must be isolated at the correct breaker and verified absent with an appropriate tester before touching the device. Turning off a wall switch is not enough.
Less Movement. A More Even Finish.
A loose mounting or recessed device can leave the wall plate looking uneven. Where the electrical box and device are sound and the spacer is compatible, added support can help improve mounting stability.
🔩 Support the Mount
Help stabilize the device’s mounting position in a suitable installation.
📐 Improve Alignment
Help bring a compatible recessed device into a more even position.
🧱 Tidy the Finish
A more consistent mounting position can help the cover plate sit neatly.
📦 Keep Extras on Hand
Choose a 10-piece or 20-piece pack for planned maintenance.
A Small Part with a Practical Job.
The listing specifies galvanized metal construction. The formed profile supports a compatible device around the mounting area, beneath the cover plate.
Confirm the Cause Before Choosing the Part.
✓ A Mounting Issue
A sound device and box may need compatible mechanical support. Have the installation assessed before proceeding.
✕ An Electrical Fault
Heat, burning smell, buzzing, arcing, cracked parts or damaged wiring require professional diagnosis—not a spacer.
Assess. Isolate. Fit. Check.
Follow the supplied product instructions, the device manufacturer’s requirements and applicable electrical codes.
Confirm Compatibility
Check the device, electrical box, mounting points, wall condition and clearance. Repair damaged parts properly before considering a spacer.
Isolate & Verify
Turn off the correct circuit, prevent accidental re-energizing and verify absence of voltage with suitable test equipment before touching the device.
Fit Without Forcing
The installer positions the support as instructed and checks that metal cannot contact live terminals or pinch wiring. Do not force an incompatible part into place.
Secure & Inspect
Use suitable hardware and the device maker’s tightening requirements. The installer checks the completed assembly before restoring power.
A Neater Finish Around Everyday Spaces.
Consider for compatible indoor outlet or switch mounting repairs around the home, office or workshop. Location alone does not establish suitability; the box, device and installation must be checked.
Check the Shape. Check the Clearance.
The product image shows an outer size of approximately 2.28 × 4.25 inches (58 × 108 mm). Compare the full profile and mounting arrangement with the intended installation.
Product Details
Frequently Asked Questions
What problem do these spacers address?
They are intended to add mechanical support to a compatible loose or recessed device mounting. They do not repair wiring faults, damaged boxes or worn receptacle contacts.
Will they fit every outlet or switch?
No universal fit is confirmed. Check the outer profile, mounting points, clearance, box and device instructions. Have a qualified electrician confirm suitability.
Can I install one without turning off the circuit?
No. Isolate the correct circuit at the breaker and verify absence of voltage with suitable test equipment before handling the device. A wall switch being off does not establish that it is safe to touch.
Does this fix a plug that keeps falling out?
No. A receptacle that no longer grips a plug may have worn contacts. A support spacer does not repair those contacts; have the receptacle assessed.
What if the outlet is hot, buzzing or smells burnt?
Stop using it and have a qualified electrician investigate. Do not cover up a fault with a spacer or attempt a cosmetic repair.
Are the spacers waterproof?
Galvanized metal is the listed material, but no waterproof electrical protection is established by the spacer. Required weatherproof boxes, covers and other location-specific protection must still be provided.
Is the metal 0.35 inches thick?
No. The 0.35 in / 9 mm callout marks the opening shown in the diagram, not the sheet thickness. No independently verified thickness is specified here.
How many pieces are included?
Choose Pack of 10 or Pack of 20. Confirm your selection before checkout; an image showing 10 pieces does not change the quantity you select.
Are outlets and wall plates included?
No. The product is the metal support spacer. Outlets, switches, wall plates and tools shown in the images are illustrative.
Can it replace a broken electrical box or a required box extender?
No. Have damaged boxes repaired properly. Required box extensions, bonding, grounding and clearances must be addressed according to the installation requirements; a spacer is not a substitute.
14-Day Return Promise
FOR ANY REASONChanged your mind? Request a return within 14 days of delivery. Contact our team with your order number to get started.
Return eligibility and any return shipping costs follow our store’s return policy.
Pay Your Way.
Familiar payment options. A straightforward checkout.
Payment availability may vary by location, device and checkout eligibility.
Tell Us About the Finished Fit.
Already had your spacers installed? Share your honest experience with our team, including the selected pack and how the product fitted the assessed installation.
Give a Compatible Mount the Support It Needs.
Choose your pack size, confirm the fit and arrange qualified installation for a steadier mounting and a neater wall-plate finish.